Playground Fasteners
Tamper resistant Types Button and truss six lobes with and without pin Diameters: Various Lengths: Various |
Socket products Types: Button, hex, flat, set screws (flat, cup, knurled, dog points) Lengths: 3/16″ thru 12″, metric |
Carriage bolts Materials: Stainles steel, steel Lengths: 1/2″ to 16″ |
Cap Screws Type: Hex Head Diameters: Various, metric Lengths: Various |
Hex cap screws Type: Partial thread, fully threaded Diameters: 1/4″ to 2″ UNC, UNF, metric Lengths: 1/2″ to 12″ |
Tapping screws Type: Flat, oval, pan, truss Diameters: #4 to 1/4″ Lengths: 1/4″ to 6″ |
Lag Screws Type: Hex, square Diameters: 1/4″ to 1″ Lengths: 3/4″ to 12″ |
Machine screws Types: Flat, oval, pan, truss, round Platings: Chrome over stainless, zinc plated, xylan Lengths: 1/4″ to 6″ |
Tek screws Type: Hex washer, flat, pan (with and without washers) Diameters: #8 to 5/16″ Lengths: 3/4″ to 3″ |
Container nut Type: Tamper resistant Diameters: Various, metric Lengths: 5/16″ |
Various nuts Types: Cap, t-nuts, wing, hex coupling, round coupling Diameters: Various, metric |
Locking nuts Types: Flange, keps, nylon insert, all metal Diameters: 6-32 to 1 1/2″-6″ |
Hex nuts Type: Hex, heavy hex and heavy jam, hex jam, 2H Diameters: #8 to 2 1/4″, metric |
Special barrel nuts Type: Various Lengths: Per your specifications |
Well nut Materials: Rubber |
Washers Types: USS, SAE, fender, MS, NAS Diameters: #4 to 2 1/2″, metric |
Finish washers Type: Flange, cup Diameters: #8 to 5/16″ |
Clamp Type: Wire rope Sizez: Various |
Manufactured items Type: U-bolts, studs, i-bolts, anchor bolts, all thread rod Diameters: Per your prints |
All thread rod and studs Types: Full thread, double end, single end Platings: Zinc, galvanized Sizes: Per your specifications |
Anchors Type: Wedge, sleeve, rawl bolt, drop-in Diameters: Various |
Shackle Type: Various Diameters: Various |
Hardware Type: S-hooks Diameters: Various Lengths: Various |
Rivets Types: 2-piece, blind, large flange, closed end, solid Lengths: Various |
Nylon products Types: Washers. clamps, cradle mounts, cap nuts, screws, hex nuts |
Cable ties Type: Screw mount, pull thru, in-line, releaseable Weights: 4# to 250# Lengths: Various |
Thread locking products Types: Epoxy, microspheres, patch, loctite |
Lockwashers Types: Medium split, internal tooth, external tooth Diameters: #4 to 2 1/2″, metric |
Clamps Type: Worm beam hose, cushion loom |
