Marine Fasteners
|
Tapping screws Type: Flat, oval, pan, truss Diameters: #4 to 1/4″ Lengths: 1/4″ to 6″ |
Machine screws Types: Flat, oval, pan, truss, round Platings: Chrome over stainless, zinc plated, xylan Lengths: 1/4″ to 6″ |
Tek screws Type: Hex washer, flat, pan (with and without washers) Diameters: #8 to 5/16″ Lengths: 3/4″ to 3″ |
T-bolts Type: Flanged and non-flanged Lengths: 3/4″, 1 1/2″, 2″, 2 1/4″, 2 1/1″ |
|
Lag Screws Type: Hex, square Diameters: 1/4″ to 1″ Lengths: 3/4″ to 12″ |
Carriage bolts Materials: Stainles steel, steel Lengths: 1/2″ to 16″ |
Special screw Type: Square/Phillips drive round head trilobular Diameters: Per your print |
Hex cap screws Type: Partial thread, fully threaded Diameters: 1/4″ to 2″ UNC, UNF, metric Lengths: 1/2″ to 12″ |
|
Sidewalk bolt Type: Slotted countersunk screw Diameters: Per your specifications Lengths: Per your specifications |
Bolt Type: Elevator Diameters: Various Lengths: Various |
Socket products Types: Button, hex, flat, set screws (flat, cup, knurled, dog points) Lengths: 3/16″ thru 12″, metric |
Hex nuts Type: Hex, heavy hex and heavy jam, hex jam, 2H Diameters: #8 to 2 1/4″, metric |
|
Various nuts Types: Cap, t-nuts, wing, hex coupling, round coupling Diameters: Various, metric |
Special barrel nuts Type: Various Lengths: Per your specifications |
Prop nuts Types: Heavy full, heavy jam, slotted |
Well nut Materials: Rubber |
|
Lockwashers Types: Medium split, internal tooth, external tooth Diameters: #4 to 2 1/2″, metric |
Washers Types: USS, SAE, fender, MS, NAS Diameters: #4 to 2 1/2″, metric |
Finish washers Type: Flange, cup Diameters: #8 to 5/16″ |
Washer Type: 6 point Diameters: 1/4″ thru 7/8″ |
|
Cable ties Type: Screw mount, pull thru, in-line, releaseable Weights: 4# to 250# Lengths: Various |
Nylon products Types: Washers. clamps, cradle mounts, cap nuts, screws, hex nuts |
Terminal and connectors Type: Electrical Lengths: Various |
Snap Fasteners Types: Caps, sockets, posts, studs, screw studs, self drilling Sizes: Per your specifications |
|
Thread locking products Types: Epoxy, microspheres, patch, loctite |
Push cap Type: Hat Sizes: Various |
Clamps Type: Worm beam hose, cushion loom |
Bits Type: Phillips and torx bits Sizes: Various |
